Our Projects

LOCATION:
88 CAVENDISH ROAD COORPAROO

EQUIPMENT:
TOSHIBA SMMS
8 INDOOR FAN COILS
1 TWIN DIGITAL 10HP INVERTER CONDENSER

Project 1 - Homedeal Air Conditioning (QLD)

LOCATION: 88 CAVENDISH ROAD COORPAROO
EQUIPMENT: TOSHIBA SMMS

This fully renovated old shopfront Queenslander was perfect for the super modular system.  The building has 4 different levels all with different thermal aspects, in addition there is 3 skillion flat roofs 1x double storey section and two small pitched roofs.

Project Sheetmetal DuctworkWhilst it would have been possible to install a traditional ducted system utilising bulkheads and duct risers the temperature control would have been a nightmare.Flexible Ductwork

The added advantage of a modular system is that only small refrigerant piping is run to the various indoor fan units providing a very flexible installation.Toshiba SMMS Piping

For this project the solution was to install the Toshiba SMMS with 8 indoor fan coils connected to a single 10hp twin digital inverter condenser.  This allowed every office independent control with the flexibility to run any single office (which happens frequently after hours) or the whole building during normal operation.

View Project Schematic PDF File Size: 459Kb
View Dynamic Project Floor Plan View as a PDF (63Kb)
View Toshiba Brochure PDF File Size: 1.5Mb
Visit Toshiba Website Toshiba Super Modular Multi System
You may need to download the free Adobe reader here to view these PDF files. Adobe Reader Download
INDOOR UNITS ROOF TYPE FCU
Showroom Pitched roof  Ducted
Sales Pitched roof Bulkhead
Install Pitched roof Ducted
Accounts Skillion roof Bulkhead
State Manager Skillion roof Bulkhead
Reception Skillion roof  Wall split
Service Co-ordinator Ground floor no roof  Wall split
Service Manager Ground floor no roof Wall split

Showroom - This area has roof space above, however it was decided to install the ducted fan coil below the ceiling for display purpose:-

Before After
Showroom - Before Showroom - After

Back to Top

Sales - This office could have been serviced from the install unit, however a bulkhead unit was selected to give individual control.

Before After
Sales - Before Sales - After

Back to Top

Install - This area also has pitched roof space. A ducted fan coil was selected to enable the kitchen and WC to be air conditioned via ducting from single fan coil unit.

Before After
Install - Before Install - After

Back to Top

Accounts - This office had little options due to the flat skillion roof.  So a purpose built bulkhead was created to house the small hideaway fan coils, which also have the advantage of individual operation and temperature control.

Before After
Accounts - Before Accounts - After

Back to Top

State Manager - This office had little options due to the flat skillion roof.  So a purpose built bulkhead was created to house the small hideaway fan coils, which also have the advantage of individual operation and temperature control.

Before After
State Manager - Before State Manager - After

Back to Top

Reception - This area has a flat skillion roof.  A wall mounted split system was selected which again provides individual operation and temperature control.

After
Reception - After

Back to Top

Service Co-ordinator - This area has no roof due to the 2nd storey.  A wall mounted split system was selected which again provides individual operation and temperature control.

After
Service Coordinator - After

Back to Top

Service Manager - This area has no roof due to the 2nd storey.  A wall mounted split system was selected which again provides individual operation and temperature control.

After
Service Manager - After

Back to Top